18x8.50-8 Wanda P332

Image Disclaimer

18x8.50-8 Wanda P332

Price:  £36.50
(£30.42 Exc. VAT)
  (3 Reviews)



615 in stock


Product Information - 18x8.50-8 Wanda P332


The Wanda P332 18x8.50-8 turf tyre has a modern pattern with deep tread and square shoulders to offer hard levels of grip without being overly aggressive so that it can be used in turf applications.

Tyre Size:  18 x 8.50 - 8
Height:  18
Width:  8.50
Rim Size:  8
PLY Rating:  4
Construction:  crossply

Customer Reviews

Average Rating (3 Reviews):  
Write a Review and share your opinions!

Good value for money.
Thursday, 2 April 2020  | 

We hadnít dealt with Terrain before but will certainly come back In future...Helpful phone call, straight forward purchasing....good product. Thankyou...

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Great customer service
Tuesday, 14 May 2019  | 

I was particularly impressed with the level of advice given during a telephone conversation. The product was equally impressive.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

The wierd sized tyre I needed, fast
Tuesday, 7 May 2019  | 

I have had my John Deere 455 for 17ars, one of the front tyres finally gave up and fell apart.. I found the size easily on the terrain tyres site and if it hadn't been for the Easter weekend would have had it three days later at standard charge.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Related Products
11x4.00-4 Wanda P332


11x4.00-5 Wanda P332


13x5.00-6 Wanda P332


13x6.50-6 Wanda P332


15x6.00-6 Wanda P332


16x6.50-8 Wanda P332


Tractor Tyre Sizes

Finding the correct tyre for your machine involves knowing the correct tyre size. The size is usually written on the sidewall of the tyre and can be displayed in a number of different ways. We have detailed an explanation of how the different methods of measuring the tyre can be written below:

Imperial Tyre Sizes - e.g. "12.4 - 28"

This measures the size of the tyres in inches. The first number denotes the width of the tyre which in the example above is 12.4". The "-" symbol shows that the tyre is of cross-ply (Bias ply) construction. The last number is the diameter of the rim (wheel) in inches. in this example it would be 28"

Metric Tyre Sizes - e.g. "340 / 85 R 24"

This is the newer, 'metric' measurement where the first number is again the width of the tyre, but is measured in mm. In this case 340mm. The second digit represents the tyre sidewall profile (height) as a percentage of the width. In this example the sidewall height would be 85% of 340mm (approx. 289mm). The letter R explains that the tyre is of radial construction and the last digit is again the diameter of the rim (wheel), still measured in inches.

PLY Ratings

PLY ratings can be quite confusing as they don't necessarily mean what they used to! A 'PLY' rating used to state how many plies (layers) of rubber were woven into the construction of the tyre. The more plies of rubber the tyre had, usually meant the tyre was capable of carrying more weight.

However, modern tyre manufacture has introduced a higher level of plastics and polymers such as nylon and polyester to increase the strength, durability and weight carrying capacity of the tyre. By using these modern materials tyres can out perform the old PLY rating indicator with many less layers making the old scale of measure a little misleading.

Modern PLY ratings tend to indicate the strength and carrying capacity of the tyre as if it had the same number of plies of rubber used from the older scale. Usually, tyres with a higher PLY rating can carry more load, but do cost more as the rating increases.

PLY ratings should be correct for the machine they are being used on. It is good practise to have an equal or higher PLY rating than the manufacturers recommend, but although the durability and carrying capacity often increases with PLY rating, the comfort of the tyre is often reduced due to the additional stiffness of the tyre.

Load / Speed Index

A load speed index is usually found on the sidewall of a tyre and is what the manufacturers have tested and rated the maximum loads and speeds that the tyre is capable of. It is very important that you choose the correct load / speed index for your vehicle as per the vehicle manufacturers recommendations. It is usually safe to increase the load / speed index, but again, manufacturer guidelines should be followed.

A load speed index gives the weight and speed a tyre is capable of e.g 116D would indicate that the tyre is capable of carrying 1250kg up to a speed of 40mph. Often in agricultural tyres, the load speed index can alter so that a vehicle travelling at a lower speed may be able to carry more weight. It is always worth checking the tyre manufacturers specifications for further details on this.

Tubeless and tube type tyres

Tyres tend to be either designed to work with an inner tube or without. Often this will be marked on the tyre sidewall as to which type of fitment the tyre has been designed for. 'Tubeless' means that the tyre has been designed to fit on a rim without the use of an inner tube. A valve is inserted into the rim that creates the seal and allows the tyre to be inflated.

Tube Type means that the tyre has been designed for use with an Inner tube. The internal construction of the tyre is usually a lot smoother so that the tube doesn't experience unnecessary friction or chafing inside the tyre.

Although it is possible to put inner tubes in a tubeless tyre, it isn't always advisable. The extra friction and wear that can be endured in this situation can cause premature failure of the inner tube, which in turn could lead to premature failure of the tyre. Tube type tyres can fit on most rims, but if changing from a tube type tyre to a tubeless, it is not just the tyre type that needs checking as it also necessary that the wheel itself is capable of being used with a tubeless tyre.